Mahsulot transport vositangizga mos kelishini tekshirish uchun bizning tanlash servisimizdan foydalaning.
In order to avoid the seasonal change of the transmission oil RAVENOL Getriebeoel EPX SAE 85W-90 GL 5 5 was developed. It can be used in winter as well as in summer.
RAVENOL Getriebeoel EPX SAE 85W-90 GL5 guarantees due to the balanced additive combination characteristics like a high pressure absorption capacity, a superior viscosity temperature behaviour, a high oxidation stability, low pour points, a good corrosion protection and non-sludging.
Application Note
RAVENOL Getriebeoel EPX SAE 85W-90 GL 5 is compatible with all brand-name transmission oils. No “flushing” required when switching to RAVENOL Getriebeoel EPX SAE 85W-90 GL 5.
Use RAVENOL Getriebeoel EPX SAE 85W-90 GL 5 in hypoid gears for hypoid gearbox, manual transmissions, axle drives, distributor and intermediate transmissions in vehicles and working machines.
Characteristics
- Optimal cold flow property
- Outstanding wear protection even with short trips in winter
- High pressure stable lubrication film, thus outstanding wear protection under any stress
- Reduced transmission noise and the best transmission efficiency under full load, i.e. even with very hot oil.
- Outstanding shearing stability
- Excellent oxidation stability, no foaming
- No oil thickening or deposits
- Extraordinary ageing stability
- Excellent viscosity-temperature properties
- Effective wear protection
- Extraordinary corrosion protection, no rust, won’t harm non-ferrous metals
- Neutral to sealants, transmissions stay tight, no oil loss
Texnik xususiyatlar
| Parametr | Qiymat | Audit |
|---|---|---|
| Kenglik, mm | 580 | |
| Uzunlik, mm | 580 | |
| Balandlik, mm | 885 | |
| Og‘irlik, kg | 201.083 | |
| Viskozite | 85W-90 | |
| Brand | RAVENOL | |
| Zichlik 20°С da, g/cm³ | 882 | EN ISO 12185 |
| Rang | tan | տեսողական |
| Viskozite 100°С da, mm²/s | 14.3 | DIN 51562-1 |
| Viskozite 40°С da, mm²/s | 130.3 | DIN 51562-1 |
| Viskozite indeksi VI | 108 | DIN ISO 2909 |
| Brookfield usuli bo‘yicha viskozite 26°C da, mPa*s | 60.100 | ASTM D2983 |
| Qotish harorati, °C | -33 | DIN ISO 3016 |
| Yong‘in chiqish harorati, °C | 222 | DIN EN ISO 2592 |
| Misga nisbatan korroziya testi, 121°С / 3 soat | 1b | ASTM D130 |